Composite Vittra APS Unique

From Bleach to D4 with just one composite!

It has a chameleon effect, making color selection unnecessary and minimizing inventory, while providing high mechanical durability and excellent gloss for restoration.

GC Initial LiSi Press là gốm thủy tinh lithium disilicate dạng phôi ép nhiệt, dùng trong labo nha khoa để chế tác các phục hình thẩm mỹ và phục hình cố định. Vật liệu có độ bền uốn hai trục >500 MPa, ổn định sau nhiều lần nung và khả năng chống mài mòn tốt.

CHỈ ĐỊNH SỬ DỤNG:

• Mặt dán sứ phủ mặt nhai (Occlusal veneers)
• Mặt dán sứ siêu mỏng (Thin veneers)
• Mặt dán sứ (Veneers)
• Inlay / Onlay
• Mão răng vùng răng trước và răng sau
• Cầu răng 3 đơn vị vùng răng trước
• Cầu răng 3 đơn vị vùng răng cối nhỏ, kéo dài đến răng cối nhỏ thứ hai làm trụ cầu cuối
• Mão đơn lẻ hoặc mão nối trên trụ implant
• Cầu răng 3 đơn vị trên trụ implant, kéo dài đến răng cối nhỏ thứ hai

CÔNG DỤNG:

• Dùng để chế tác phục hình răng cố định bằng lithium disilicate với độ bền và tính thẩm mỹ cao.
• Cung cấp nhiều mức độ trong và độ đục để phù hợp với tình trạng nền răng và yêu cầu thẩm mỹ của phục hình.
• Có thể kết hợp với GC Initial LiSi veneering ceramic và GC Initial IQ Lustre Pastes ONE để hoàn thiện màu sắc và hình thái phục hình.
• Công nghệ HDM (High Density Micronization) giúp vật liệu có cấu trúc đồng nhất, độ bền uốn cao và khả năng chống mài mòn tốt.

THÀNH PHẦN:
- 65–75% Barium glass (Thủy tinh bari)    
- 25–35% Methacrylate monomer    Monome methacrylate    
- Silica (Silicon dioxide)
- Initiator (Chất khơi mào quang trùng hợp)
- Colorant/Pigment (Chất màu)    
- Stabilizer (Chất ổn định)

CHỈ ĐỊNH SỬ DỤNG
- G-ænial Universal Injectable là vật liệu composite resin quang trùng hợp dạng tiêm, dùng trong phục hồi răng.
- Có thể dùng để sửa chữa phục hình composite khi được chỉ định.
- Vật liệu dạng tiêm giúp dễ thao tác và thích nghi với thành xoang, sau đó được quang trùng hợp bằng đèn chiếu quang.
- Phục hồi trực tiếp các xoang loại I, II, III, IV và V
- Trám bít hố rãnh
- Trám bít các vùng nhạy cảm ngà
- Sửa chữa các phục hình thẩm mỹ trực tiếp/gián tiếp, mão và cầu răng tạm, cũng như các khiếm khuyết ở đường hoàn tất (khi đường hoàn tất nằm trên men răng)
- Chặn các vùng lẹm (blocking out undercuts)
-  Lớp lót (liner) hoặc lớp nền (base)
-  Chế tạo mão, cầu răng, inlay và veneer bằng kỹ thuật gián tiếp kết hợp với các thành phần GRADIA hoặc GRADIA PLUS (vui lòng tham khảo hướng dẫn sử dụng riêng của các sản phẩm này).
- Cố định răng (nẹp răng) kết hợp với các loại sợi như sợi GC everStick. Tuân theo hướng dẫn của nhà sản xuất.

CHỐNG CHỈ ĐỊNH
-  Che tủy trực tiếp.
-  Tránh sử dụng sản phẩm này cho bệnh nhân đã biết có tiền sử dị ứng với monomer methacrylate và polymer methacrylate.

THÀNH PHẦN:
Bis-GMA (Bisphenol A diglycidyl methacrylate)
Bis-MEPP (Bisphenol A polyethoxy dimethacrylate)
UDMA (Urethane dimethacrylate)
TEGDMA (Triethylene glycol dimethacrylate)
Silica fine particle (Hạt silica mịn)
Barium glass (Thủy tinh bari)
Pre-polymerized filler (Chất độn polymer hóa trước)
Pigments (Chất màu)
Photo initiator – Chất khơi mào quang trùng hợp 

CHỈ ĐỊNH SỬ DỤNG
- GC SOLARE Sculpt là composite resin quang trùng hợp dùng trong phục hồi răng thẩm mỹ
- Phục hồi trực tiếp cho các xoang loại I, II, III, IV và V.
- Phục hồi trực tiếp cho các tổn thương hình nêm và xoang vùng cổ răng (bề mặt chân răng).
- Phục hồi trực tiếp cho mặt dán (veneer) và đóng khe thưa.
- Vật liệu trám phục hồi trực tiếp các tổn thương sâu răng ở răng trước và răng sau.
- Phục hồi các tổn thương mòn cổ răng, khuyết cổ răng và các tổn thương không do sâu răng.
- Dùng để tái tạo hình thể, giải phẫu và thẩm mỹ răng.
- Có thể sử dụng trong phục hồi răng sữa.
- Vật liệu quang trùng hợp, đông cứng bằng đèn quang trùng hợp nha khoa.
- Màu A1, dùng để lựa chọn màu phù hợp khi phục hồi răng tự nhiên.

CHỐNG CHỈ ĐỊNH
- Che tủy trực tiếp.
- Tránh sử dụng sản phẩm này cho bệnh nhân đã biết có dị ứng với
monomer methacrylate hoặc polymer methacrylate.

Testing heading 2

LLIS is a special composite for anterior and posterior dental restorations. Its excellent balance of optical, chemical, and mechanical properties ensures strong and durable restorations. The inorganic filler particles in LLIS account for 77.5 to 78.5% by weight or 56 to 59% by volume, with particle sizes ranging from 40 nm to 3.0 microns and an average particle size of 0.8 µm. It is used for cavity types: I, II, III, IV, V, and VI, anterior teeth, lingual teeth, and direct veneers.

• 5-color kit:

EA2, EA3, EA3.5, EB2, and DA3 (4-gram tubes);

• Tooth enamel color:

EA1- EA2- EA3- EA3.5- EA4 - EB1- EB2- EB3 - EC2 – EC3 and bite edge (4-gram type);

• Ivory color:

DA1, DA2, DA3 (Universal), DA3.5, DB2. (4-gram tube).

• The color of tooth enamel and dentin is based on the Vita Classical tooth color chart.

• The mechanical properties of the product meet the requirements for both pre- and post-restoration (microhybrid composite).

• Natural light blocking.

• The translucency of LLis composite is similar to that of natural teeth.

• Balance fluorescence with tooth structure.

• High conversion rate.

• The cap is attached to the tip of the tube.

• Offers full polishing capability when compared to other products.

• Consistency and ease of use.

• Available in a variety of colors. Transparency similar to natural teeth;

• The amount of fluoride is balanced with the hard tissue of the natural tooth;

• Diverse indications for anterior and posterior teeth;

• Excellent light-blocking properties;

• Excellent physical properties.

• The color of tooth enamel and dentin is determined by the Vita Classical tooth color chart, controlled by a spectrophotometer.

• 16 colors to choose from.

Composite Vittra APS

The formula contains spherical zirconium silicate filler particles, which facilitate easy polishing and create a superior, smooth finish with improved abrasion resistance, resulting in long-lasting aesthetic durability for the restoration.

Furthermore, the proprietary APS technology (Advanced Polymerization Technology) extends polymerization time by four times, allowing dentists to comfortably perform shaping even under reflected light. This technology also delivers true-to-life colors with minimal difference between before and after polymerization, colorfastness, and improved mechanical properties.

I. Some basic information about DeltaFil sealing cement products

DeltaFil cement is considered a superior solution and has a long history in dental practice. This type of cement is suitable for all patient groups and optimally meets their specific needs. Why is this product so superior? Refer to the information below for more details:

II. Product Information for DeltaFil Sealing Cement

By providing revolutionary materials, DMG has gradually proven its position after more than 50 years in the ever-changing dental market. DMG continuously researches and improves its products. And one of the successful products thanks to DMG's innovative technology is DeltaFil cement. DeltaFil constantly innovates with the ability to increase wear resistance for restorations without affecting biocompatibility and fluoride release, and it will certainly not disappoint you.

1. DeltaFil cement composition

DeltaFil cement is preferred due to its successful application of elastomeric micelle technology. With this technology, elastic molecules are incorporated into the material to prevent potential microcracks. In addition to stability, this technology allows for easy handling, similar to composites.

2. Reasons why you should choose DeltaFil sealant cement

2.1. Extremely easy to use with high aesthetic appeal.

Sometimes, the instability of certain materials makes bonding difficult for dentists, resulting in unsightly results and lengthy preparation times. With DeltaFil, you don't need to worry about that. DeltaFil is easy to mold, has excellent stability, and doesn't stick to instruments, minimizing the dentist's processing time. Additionally, DeltaFil comes in a variety of colors (5 colors: A1, A2, A3, A3.5, A4), allowing patients to choose their preferred bonding color. Deltafil sealing cement comes in a variety of colors to choose from.

2.2. Durability over time

Thanks to patented micelle technology, DeltaFil cement delivers outstanding performance with impressive flexural and fracture strength. You don't need to spend time and effort applying multiple layers of protective varnish to achieve a naturally bright tooth surface.

Elastomeric technology delivers excellent results.

2.3 Minimize tooth sensitivity.

With its superior formula, after treatment with DeltaFil cement, your patients will experience no pain and reduced risk of post-treatment sensitivity. This can be considered a success for DMG, helping patients avoid the fears associated with dental treatment.                                      

3. Indications for the use of DeltaFil cement

• Suitable for restoring cavities I, II, III, and V of deciduous teeth.

• Suitable for restoring sinuses I and II that are not subject to occlusal loading; sandwich technique.

• Suitable for restoring the trigeminal sinus; sandwich technique.

• Suitable for temporary restoration of sinuses I, II, III, and V.

• Used for filling widening cracks.

• Used for compression and lining fillings.

• Used for tissue regeneration.

As you know, a worthwhile purchase is one that satisfies all your criteria. Understanding this, we have tested our products on numerous dentists worldwide, and the vast majority have been satisfied. Hurry and get yourself the best, genuine DeltaFil dental cement at the most reasonable price here!

LuxaPost - Fiberglass pins used in pulp reconstruction

• Perfectly compatible with LuxaCore

• Forming a unified block - MonoBlock Concept.

• The absolute bending value is similar to dentin, minimizing the risk of fracture in restorations.

• Excellent light blocking, up to 375%

• High aesthetics

• The tapered shape allows for gentle manipulation of the tooth structure.

• Each size has a specific type of drill bit.

• Diameters: 1.25mm, 1.375mm, 1.5mm, 1.75mm, with easily identifiable color codes.

• Pre-silanization enhances the bonding ability with the adhesive material.

Today, LuxaPost fiberglass posts are available in two packaging options: 5-post kits and 10-post kits – offering both convenience and cost savings for dentists. These fiberglass-reinforced composite posts provide absolute flexural strength, just like natural dentin.

The outstanding advantages of LuxaPost

Just like natural tooth structure : With LuxaCore Z, the material properties of LuxaPost are also based on real teeth. LuxaPost's absolute flexural value is low, equivalent to natural dentin. This property aims to minimize the pressure exerted on the root canal after post placement and reduce the risk of root fracture. High translucency prevents the post from shining through the tooth tissue. Therefore, maximum aesthetics are ensured without any obstacles.

Pre-silanized and radiopaque: The new generation of LuxaPost fiberglass posts is radiopaque and pre-silanized. This fully meets the practical needs of dentists, simplifying procedures and reducing treatment costs. Additional silane is no longer necessary. For dentists who still wish to add silane before treatment, DMG still provides a silane system if needed.

LuxaCore Z - Composite for core reconstruction and pin fixation

Advantage:

• Material that resembles real tooth enamel.
• Very high compressive strength
• Adding Zirconia filler helps increase load-bearing capacity.
• Excellent flow properties
• Reliable coincidence
• Materials used for both core formation and post placement.
• Maximize bending strength when combined with LuxaPost.

Like real ivory, it allows for precise preparation.

Bone marrow reconstruction composite LuxaCore Z is a premium composite from DMG. The material used in abutment preparation and post placement offers a cutting capability similar to natural dentin. This ensures controlled material removal, precise margin preparation, and optimal control by the dentist using the abutment. At the transition points from dentin to the LuxaCore Z area, it is difficult to distinguish the difference. This material allows for preparation without the need for grooving or undercutting. This ideal condition enables dental technicians to perform their work with precision. The result: Excellent fit, long-lasting restoration, and the best possible care for your patient. The combined products offered ensure the best quality of treatment: LuxaPost – a composite post and LuxaBond-Total Etch – a bonding system – will be invaluable assistants to dentists in restorative cases.

The outstanding value of LuxaCore Z

LuxaCore Z offers the most natural-looking restoration, closely resembling real teeth and dentin, compared to its competitors. Furthermore, the addition of zirconia fillers provides excellent compressive strength. This ensures top-quality restoration and a natural appearance. (See chart on the right)

Excellent flow properties

The material's excellent flow properties ensure maximum adaptability, especially in the wall shape of deep cavities and post placement areas. When used in post placement, it is advantageous to use a material with a thin film thickness of only 20 μm, such as Luxacore Z! (the ISO 4049 standard limit for cement-based bonding materials is 25 μm).

Using fewer materials means a more reliable solution.

Monolithic = Stable

The more rushed the process, the slower it becomes. A single material is sufficient for both the crown preparation and post placement. This reduces time pressure, simplifies the work, and creates a reliable restoration. LuxaCore Z crown restoration material can be used with any pre-silanized post. However, DMG's LuxaPost is recommended for best results. This fiberglass post has the same absolute flexural value as LuxaCore Z and natural dentin. Using a small amount of the appropriate material for a single unit ensures high stability. Compressive stresses can be avoided in a sensitive system of tooth, post, bonding material, and crown preparation.